Eneo GLS-2302H User Manual
Page 55
55
Event:
Click on the
Add button in the Event column to enter the „Event” setting page.
. Enter the Event name. Checkmark the „Enable this event” box and activate the function.
Then set the Priority and the Source from the drop-down list.
„Priority”: The event with higher priority will be executed first.
. Select the event triggering mode.
„Video motion detection”: Select the windows which need to be monitored.
„Periodic”: The event is triggered in specified intervals. The unit of a triggering interval is a minute.
„Digital input”: The event is triggered when the DI status is changed by an external device.
„System boot”: The event is triggered when the system boots up.
. Set the recording schedule time.
4. Set the Trigger D/O of activating the action. Check it to trigger digital output for specific seconds when an event
is triggered.
5. Click on „Submit” to save or click on „Don’t Submit” to go back to the Event main page.