Eneo GLS-2302H - Manual (Page 46)

46
• Change the System Setting – Update Firmware
Please follow the steps below to update the firmware through the network as necessary.
. Click on the
Firmware Upgrade button on the left side of the „Date and Time” page to enter the
„Upgrade Firmware” page.
. Click on the „Browse…” button to select the UPDATE.BIN file which was copied into your computer.
. Click on the „Upload” button.
NOTE: DO NOT power off the Video Server while updating the firmware.
NOTE: Don’t interrupt the process while the unit is updating itself.
NOTE: Please make sure that the UPDATE.BIN file is appropriate to the model of the unit.
Updating with the wrong UPDATE.BIN file may cause physical damage to the device.
NOTE: The Temporary Internet Files (or cache) folder contains Web page content that is stored in your hard
disk for quick viewing. We suggest deleting the Temporary Internet Files immediately after updating
the firmware. To delete the files in the Temporary Internet Files folder, follow these steps:
. Quit the Internet Explorer and quit any instances of the Windows Explorer.
. Click Start, click Control Panel, and then double-click Internet Options.
. On the General tab, click Delete Files under Temporary Internet Files.
4. Select the Delete all offline content check box in the Delete Files dialog box, and then click OK.
5. Click OK.