Eneo GLS-2302H - Manual (Page 37)

7
Description of function keys:
Enable DDNS Function Checkmark to activate the function
DNS The Domain Name System is an Internet service that translates domain names into
IP addresses (e.g. 9.68.0.0). The address can be obtained from your ISP or network
gateway.
Server Address: Select your Dynamic DNS provider from the pull down menu or enter the server address
manually.
Host Name Enter the host name of the DDNS server.
User name Enter your user name or e-mail used to connect to the DDNS.
Password Enter your password used to connect to the DDNS server.
Verify Password Enter your password again to connect to the DDNS server.
Timeout Enter the DNS Timeout values for registering the IP address.
Status Indicate the connection status, automatically determined by the system.
• Change the Network Settings – HTTPS
The „Network” page has, on its upper left, the „HTTPS” icon. Please follow the steps below to change the HTTPS
setting through the network as necessary.
. Click on the
HTTPS button on the upper left menu to enter the „HTTPS Setting” page.
. Mark the „Enable HTTPS secure connection” to activate the function.
. Click to select the „Create certificate method” from „Create self-signed certificate automatically”, „Create
self-signed certificate manually” and „Create certificate request and install”.
4. Click „Create” to save the create certificate settings.