Eneo GLS-2302H - Manual (Page 53)

5
. Set the details of the Video Clip.
„Source„: Select the video source.
„Pre-event recording„: The interval of pre-event recording in seconds.
There are two limitations for video clip file.
„Maximum duration„: The maximum recording file duration in seconds.
„Maximum file size„: The maximum file size would be generated.
4. Click on the System log to activate the function.
5. Click on „Submit” to save, or click on „Don’t Submit” to go back to the Event main page.
Media settings:
() Click Add under the Media column on Event Settings page to open the Media setting page.
On this page, you can specify the type of media that will be sent when a trigger is activated.
A total of 5 media settings can be configured.
() Enter the Media Name for the media setting.
() Select the Media Type. There are three choices of media types available: Snapshot, Video Clip and System log.
Select one of the media types.
Snapshot: Select to send snapshots when a trigger is activated.
(a) Source: Select to take snapshots from the video profile.
(b) Send pre-event image(s) [0~4]: The Video Server has a buffer area; it temporarily holds data up to a
certain limit. Enter a number to decide how many images to capture before a trigger is activated.
Up to 4 images can be generated.
(c) Send post-event image(s) [0~7]: Enter a number to decide how many images to capture after a
trigger is activated. Up to 7 images can be generated.
NOTE: For example, if both the Send pre-event images and Send post-event images are set
to 4, a total of 8 images are generated after a trigger is activated.
(d) File Name Prefix: Enter the text that will be appended to the front of the file name.
For example, the file name will be in this form:
The format is: YYYYMMDD_HHMMSS
Snap_20090101_122030
The prefix file name
Date and time suffix
(e) Add date and time suffix to file name: Select the option to add the date/ time suffix to the file name.
(f) Click Submit to activate the setting.