Eneo GLS-2302H - Manual (Page 34)

4
Description of function keys:
PPPoE Setting If you use the Video Server to connect directly to the Internet, you will need to enter the
username and password, which were given to you when you set up your account with
your Internet Service Provider. If the Video Server is behind a router or a gateway, you do
not need to configure this setting.
Username Enter in the given space.
Password Enter in the required space.
• Change the Network Settings – Port Detail
The „Network” page has, on its upper left, the „Port Detail” icon. It allows you to specify and reserve the ports for
both the HTTP and RSTP streaming.
Please follow the steps below to change the Port Detail setting through the network as necessary.
. Click on the
Port Detail button on the upper left menu to enter the „Port Detail” page.
. Enter the „HTTP port” and the „Access name for stream” for the MJPEG streams of the HTTP.
. Enter the „HTTP port”. The default value is 44.
4. Enter the „RSTP port” and the „Access name for stream” for the MJPEG or JPEG streams of the RSTP.
5. Click on the
Submit button to submit the new setting.
NOTE: If you want to use an RTSP player to access the Video Server, you have to use the following RTSP URL
command to request transmission of the streaming data.