Eneo PXC-2080CS - Manual (Page 93)

Web Admin User Manual
- 38 -
In Image Quality level setup, select the left for higher image quality, but it requires higher
network bandwidth. Selecting the right requires lower network bandwidth, but gives decreased
image quality.
After configuration is finished, click Apply button to save the setting. If you click Default
button, the entire configuration will be reset to the original values.
Camera Control
Click Camera Control on the bottom of Camera & Motion Configuration menu.
H.264
Rate Control Mode: VBR (Variable Bit
Rate)
Video frames are encoded with selected
image quality and GOP. Encoded frames
have different data size from each other. Image Quality: one of 6 quality levels
(Low Compression / Highest / High
Normal / Low / Lowest)
GOP Structure: Distance between I-
Frames. That is filled with P-frames.
Rate Control Mode: CBR (Constant Bit
Rate)
Video frames are encoded with selected
image quality and GOP. Encoded frames
have the same data size as other frames.
Due to the constant bit rate, it has better
stable transmission performance. Bit Rate Control: Total number of
Bits encoded per second. The higher
Bit Rate, the better image quality.
Can be set between 32kbps and
2Mbps.
GOP: Distance between I-Frames.
That is filled with P-frames.
M-JPEG -
Image Quality: one of 6 quality levels
(Low Compression / Highest / High
Normal / Low / Lowest)
Low
Compression
Highest High Normal Low Lowest