Eneo PXC-2080CS - Manual (Page 113)

Web Admin User Manual
- 58 -
Output 1 – Output
4
Select the output port to configure for Alarm Output Service.
Service Select Enable to use the service, otherwise select Disable.
After finishing the configuration, click Save button to apply the change and continue to the
next page. Clicking Back button will cancel the changes and go back to the previous page.
6.1.7. Alarm Output Service Configuration for each Output
Item Description
Condition 1 -
Condition 3 Select a condition to configure Alarm Output Service. Up to 3
conditions can be set respectively.
Alarm Output
Duration Select how long the Alarm Output signal is maintained. Unit is in
second.