Eneo PXC-2080CS - Manual (Page 126)

Web Admin User Manual
- 71 -
recording conditions are configured properly and video is not being recorded at the moment,
you need to click the Record button to start recording.
Once recording has been started, the Status field will change to Recording. From that point on,
when the conditions meet the setup value in recording condition, the video will be recorded to
the HDD.
7.3. View Recording Profile
When it’s needed to check recording configurations which have been made to each camera, it
may take quite some time to go through the menu tree. In this case, you can get the overview
of the recording configuration by clicking View Recording Profile on the menu.
To view the recording profile, click Recording Profile. It will display a pop-up window that
shows the recording configuration in one screen.
Note: Record button will become Stop button after pressing. If you want stop
recording, click the Stop button again.