Eneo PXC-2080CS - Manual (Page 9)

8
5.4 Commissioning
• Connect PoE(IEEE Std. 802.3af) or the power supply to the power terminal on the rear panel of camera
firstly
• Plug the power adaptor to the mains supply secondly
• Power indicator LED will be lit
• The camera is ready for operation
5.5 Power Supply Connections
Camera can work with PoE(IEEE Std. 802.3af) and either 24VAC or 12VDC, dual voltage power. It does
NOT require the polarity-matched connection for 12VDC supply. Primary and secondary grounds are
completely isolated to avoid the possible ground-loop problems. Its excellently wide operating voltage
range of 10.5V-30V for DC and 12-28.8V for AC gives an extra flexibility at the installation.