Eneo PXC-2080CS - Manual (Page 104)

Web Admin User Manual
- 49 -
If you click on a Condition link, the Advanced Service windows is displayed as shown below.
Alarm Service is activated only when the conditions in Advanced Services are met.
To save the setting, click Save button. If you want to cancel it, click Back.
Item Description
Service This shows what service this condition is for.
Module ID Module ID for current setup
Camera ID Channel ID for current setup
Enable / Disable Select Enable to use Condition, otherwise select Disable.
Always
This Condition applies all the time. (Schedule or Event is not
usable)
Schedule Only
Use Week, Time, and Date in Condition parameter. If none
of weekdays is set, it is activated every day.
Event Only
It is activated only when any of the following events occurs.
(Sensor, Motion Detection, Camera Connection, Server
Booting)