Eneo PXC-2080CS - Manual (Page 82)

Web Admin User Manual
- 27 -
For Multicast Address:
Use “rtsp://network video server ip address/mcam0_0”. If there are multiple channels, use
mcam0_x, x (0~3) with each channel number applied. If there are multiple modules, use
mcamx_0 x (0 ~ 3) with each module number applied.
Service
Enable: Start RTSP service
Disable: Stop RTSP service
RTSP Port
In normal case, use default port number 554 to connect to RTSP
service. If not using port 554, enter the port number you want to
use.
e.g.) port number 445==> rtsp:// network video server ip
address:445/cam0_0
RTP Start
Port
The starting number of the port for video transfer. Each time
video transfer connection is made, the port number also
increases.