Eneo PXC-2080CS - Manual (Page 137)

Web Admin User Manual
- 82 -
Now the final confirmation window will appear. Click Reboot button and the system will reboot.
8.5.2. System and Web Update
Click the Start button next to System and Web Update item on the menu, and a confirmation
window will appear. Click OK button to proceed the update, otherwise click Cancel.
Go through the same steps as in All Update process (Kernel and RAM Disk updates are not
made here). After update is done, click Reboot to start the system over.
8.5.3. Web Only Update
Click the Start button next to Web Only Update item on the menu, and a confirmation window
will appear. Click OK button to proceed the update, otherwise click Cancel. The rest of the
process is the same as in All Update part. After update is done, click Reboot to start the
system over.
8.5.4. Sensor Device Driver Update
When adding a new Sensor device that doesn’t have a proper driver found in Server , it is
required to install a driver for it. The name of the file used in update process is
SensorModel.bin.
Click the Start button next to Sensor Device Driver Update on the menu, and a confirmation
Note: If a new SensorModel.bin file needs to be made, please contact
Supplier.