Eneo PXC-2080CS - Manual (Page 120)

Web Admin User Manual
- 65 -
Up to 4 different recording conditions can be set per camera. All the conditions are checked by
OR logic, so it will start recording when at least one of the conditions is met. To set a condition,
click Condition 1, then Condition setup screen will be displayed.
Item Description
Condition 1~4 Set the conditions for recording
Graphs for Time, Day of week,
Alarm, Motion, Camera
Connection
Graphic displays of conditions for recording
Recording Service
Click Enable to record the video. Click Disable
otherwise.
Server Module ID
Server ID number of the added VS Module ID (IP
Devices).
Camera Number Camera number to select.
Camera Name
The name of the camera selected. Use up to 31
alphanumeric or 15 Unicode characters.
Pre-Recording Speed
Recording speed before Event. Valid only when
Recording condition is set to Always or Schedule.
Pre-Alarm Count
The number of frames stored before Event. Up to 5
frames. Valid only for Event-Driven Recording.
Post-Recording Speed
Recording speed after Event. Valid only when
Recording condition is set to Event-Driven
Recording.
Post-Alarm Count
The number of frames stored after Event. Up to 5
frames. Valid only for Event-Driven Recording.