Eneo PXC-2080CS - Manual (Page 111)

Web Admin User Manual
- 56 -
6.1.4. Sensor Notification Service Configuration
Item Description
Input 1 - Input 2 Select which input to set up for Sensor Notification Service
Service
Select Enable to use Sensor Notification. Otherwise select
Disable.
Service Mode
Select network mode for CGI. Select one among HTTP, TCP, or
UDP.
Main IP address Enter IP address to use in CGI or other functions
Aux1 ~ Aux 3 IP
address Enter 3 more addresses to use in CGI or other functions if
needed.
Port Enter port number for CGI or other functions. Default is 80.
CGI Path or
Alarm Common
Message
Enter CGI Path for CGI or other functions.
User ID Enter User ID to log in.
Password Enter Password for the User ID to log in.