Eneo PXC-2080CS - Manual (Page 78)

Web Admin User Manual
- 23 -
First, select Enable to use the feature. Then enter the address of the SMTP server which is
needed for email service. If your SMTP server requires a user ID and a password for
authentication, you will have to get them from ISP or network admin. Enter the ID and
password.
In Sender field, enter your email address or other meaningful words that will show the message
was sent from the Server as a notification. Now enter the email addresses of the recipients in
the Recipient fields, up to 3 persons. In the User-Defined Message box, you may put a
message to explain why the message was sent. After finishing the setup, click Apply to save
settings.
Mail Notification
Enable: Send email
Disable: Do not send email
SMTP Server SMTP Server address for email service
Authentication Login
Enable: user ID and password are required for SMTP
server
Disable: user ID and password are not required
User ID User ID for SMTP server