Eneo PXC-2080CS - Manual (Page 133)

Web Admin User Manual
- 78 -
Cancel, the web browser is still open, but you will not be able to access the Server until the
rebooting is finished.
8.4. Factory Default
Whenever it is required to restore the configuration of Camera setup to factory default
condition, you can do it here. Network configuration is not affected by this action.
Click Factory Default on Utilities menu. A confirmation screen will be displayed as shown Click
Factory Default button, otherwise click Back button to cancel it. The second confirmation
screen will appear. Click OK button to restore the factory default condition right away. If you
click Cancel, web browser will go back to the previous screen without any change made.