Eneo PXC-2080CS - Manual (Page 18)

17
DAY/NIGHT
EXT
for
IR LED
AUTO
for
No IR
LED
Sets DAY / NIGHT to EXT, AUTO, COLOR and B/W.
SMART IR can be set to reduce the saturation by the strong IR illumination
in the night in any menu of EXT, AUTO and B/W(NIGHT)
Setting SMART IR in any menu is identically applied to other menu.
Zero(0) turns off SMART IR and High setting avoids the saturation strongly
but the corners will be darker accordingly.
EXT – DAY or NIGHT is determined by the built-in light photo sensor.
Camera with IR LED must be set to EXT.
AUTO – Used when DAY or NIGHT is determined by light level through
the lens and DAY from/to NIGHT is switched automatically by the
scene brightness.
D<-->N THRESHOLD, D<->N GAP, D<->N DELY and SMART IR can be
set in the menu.(See ‘6.7.2 DAY/NIGHT AUTO’ for detail.)
When EXPOSURE>AGC is less than 10, DAY/NIGHT AUTO is disabled
and forcibly switches to ___(DAY) to avoid the malfunction.
EXT, B/W(NIGHT) and COLOR(DAY) is independent on AGC level.
B/W(NIGHT) – Forcibly removes IR cut filter and switches to B/W
regardless of light level.
COLOR(DAY) – Forcibly DAY/NIGHT is disabled and outputs color video.
PICT ADJUST
Sets WHITE BAL, SHARPNESS, COLOR GAIN, GAMMA, SHADING.
See ‘6.8 PICT ADJUST’ for detail.
SPECIAL
Sets MIRROR/FLIP, PRIVACY, MOTION, MOTION ZOOM, PIXEL DEFECT,
TITLE SET, DISPLAY, DEFOG, POINTING ZOOM
TV SYSTEM. See ‘6.8 SPECIAL’ for detail.
SYSTEM
Sets TV SYSTEM, RESOLUTION, COMM.SETUP, LANGUAGE and
FACTORY DEFAULT.
EXIT
SAVE & EXIT – Exits the menu after saving the parameters.
EXIT – Exits the menu without saving the menu.