Eneo PXC-2080CS - Manual (Page 16)

15
6.1.2 Camera setup in the menu
Setup menu can be accessed and controlled by OSD control joy stick at the back of camera.
Five commands are available with the joy stick.
Picture of OSD may differ by the models.
In the menu, use ▲,▼ to move menu, ◀,▶ to change the settings and press
☟ to select or enter.
The actual value of FACTORY DEFAULT may differ from this manual due to further technical improvements.
Joy stick
SYMBOL descriptions for joystick operation;
-▲,▼,◀,▶
denotes the directions of Joystick
lever operation.
- ☟ denotes the long press down straightly
for about 1.5 seconds.
D-Zoom Adjustment
(Only works when OSD Menu is not operating &
IP is not connected)
▲ D- Zoom In
▼ D-Zoom Out