ARM Electronics DVRHD OSD - Manual (Page 64)

OSD Setup Manual
63
Appendix D: Operating USB Mouse on the DVR
Users can use an USB mouse to operate the DVR. To use the USB mouse, please read
through the following descriptions.
Plug in an USB mouse to any USB port of the DVR. Move the USB mouse, and the cursor
should appear. Move the cursor to the top-left of the screen, and 8 functional icons will be
displayed, as shown below.
The description of the 8 functional icons on the upper row are listed as the below. They are
similar to the function keys on the front panel.
1 Menu 5 Call
2 Mode 6 Play
3 SEQ 7 Pause
4 Zoom 8 Search
Click on the 3 icons on the lower row to display viewing modes 2x2, 3x3, and 4x4.
Clicking the left button of the USB mouse functions the
same as pressing the “ENTER” key on the front panel of the
DVR. Clicking the right button of the USB mouse functions
the same as pressing the “ESC” key on the front panel of
the DVR. The scroll wheel is used to change values. For
example, if users want to change dome camera ID, enter
the OSD setup menu and go to the following path:
Æ Æ
Left click on and scroll the wheel up or down, the ID number will change as the
scroll wheel moves. Stop moving the scroll wheel when the preferred ID number appears,
then left click on the and the ID number will be changed.