ARM Electronics DVRHD OSD - Manual (Page 46)

OSD Setup Manual
45
„ Video Loss Detect
This item allows users to enable or disable Video Loss as an alarm event. Select
to enable Video Loss alarm events, or to disable.
„ Motion Detect
This item allows users to enable or disable motion detection function of Versatile
H.264 DVR. Select to enable Motion Detect alarm events, or to
disable. If motion detection function is enabled, it is required to define motion
detection parameters such as detection area and sensitivity settings in
Config>.
„ Motion Detect Indicator
This item allows users to display/ hide the motion detection indicators. Select
to display the indicators, or to hide them.
„ Detection Config
If motion detection function is enabled, it is required to define the motion detection
parameters such as detection area and sensitivity settings. Select a channel for
setting the parameters, move the cursor to and press ENTER.
The detection configuration menu displays as follows.
Detection Config
Detected Area Setup
Sensitivity
Block Threshold
88%
4
- Detected Area Setup
After selected this item, the detected area is displayed as follows. The
detection area consists of 192 (16×12) detection grids.
Use the Direction keys to move the cursor and press ENTER to select or
de-select a grid. Press MODE to select all of the grids for detection; press
MODE again to de-select all of the grids.