ARM Electronics DVRHD OSD - Manual (Page 38)

OSD Setup Manual
37
„ Weekend Schedule
determines whether a weekend schedule is in effect.
Choose to take effect the related weekend settings.
„ Weekend Start
ʳ / End ʳ
indicates the specific day and time when weekend schedule
should begin, for example, FRI 18:00. indicates the specific day
and time when weekend schedule should end, for example, MON 06:00. Time is
indicated in 1-minute increments.
Note that the value users have set indicates when the regular Day and Night
scheduling ends, and Weekend recording begins.
< Preset Record Configuration >
is used to select the preset recording quality and frame rate. Different
preset recording quality levels are offered for users to choose: , ,
, , , <512Kbps DSL>, <256Kbps DSL>,
<128Kbps DSL> and . According to various Record modes, the preset configuration
options for normal and event status are described in terms of relative recording rate PPS
(Picture Per Second) and recording size for each channel in the table below.
These preset conditions , , , ,
, <512Kbps DSL>, <256Kbps DSL>, and <128Kbps DSL> override any other
quality and rate settings. Refer to the table below for file sizes of different preset conditions.
Note that and are not included in the table because there are
further details for these two settings. will be described in
section. will be explained in section.
NTSC 720 X 480 @ 30PPS 720 X 240 @ 60PPS 360 X 240 @ 120PPS
PAL 720 X 576 @ 25PPS 720 X 288 @ 50PPS 360 X 288 @ 100PPS
Best 22 KB/Pic 12 KB/Pic 6 KB/Pic
Standard 14 KB/Pic 8 KB/Pic 4 KB/Pic
Extended 6 KB/Pic 4 KB/Pic 2 KB/Pic
512Kbps DSL 4 KB/Pic
256Kbps DSL 3 KB/Pic
128Kbps DSL 2 KB/Pic
NOTE: The total PPS is equally shared by all channels, which means, even if one
channel has not been connected with a camera, the channel still reserves its share
of PPS. However, if is selected, the channels not connected to
cameras will not be recorded. In other words, the total PPS will be shared by
channels with cameras connected only.