ARM Electronics DVRHD OSD - Manual (Page 45)

OSD Setup Manual
44
< Email Attachment >
The function allows the DVR to send out a brief AVI video regarding the event. The number
of the attached AVI video will be equivalent to the number of cameras connected to the
DVR. For example, if the DVR has been connected with 8 cameras, then 8 videos will be
attached to the notice email. The total size of the video will be about 2 MB.
Select to enable this function; or to disable it.
NOTE: The video clips of the Email Attachment will ONLY be in *.avi format. Please
download the Divx Player from www.divx.com to play the *.avi files.
< Event Full Screen >
This function allows the DVR to display the alarm channel in full screen size when an alarm
is triggered.
Select to disable this function; select
Monitor when an alarm is triggered; select to display the alarm channel on Call
Monitor; and select to display the alarm channel on both Main Monitor and Call
Monitor.
< Event Duration >
This item determines the duration of the buzzer and Alarm Out relay function after an alarm
is triggered. The available event duration range is from 5 second to 999 seconds.
< Per Channel Config >
This menu is used to configure , ʳ ˏMotion Detect>, and
settings for each channel. The menu is displayed as below.
Per Channel Config
Channel Select
Video Loss Detect
Motion Detect
Motion Detect Indicator
Detection Config
Alarm In
Alarm Out CH1
OFF
OFF
ON
OFF
ON
„ Channel Select
The item is used to select a desired channel for setting the parameters. Move the
cursor to and press ENTER, then select a channel using UP /
DOWN keys. Press ENTER again to confirm the selection.