ARM Electronics DVRHD OSD - Manual (Page 9)

OSD Setup Manual
8
Move the cursor by pressing Direction keys and press ENTER to select characters.
Alternatively, press channel keys 1~9 to directly enter number 1~9, press channel
key 10 to directly enter number 0, or press “CALL” key to directly enter a period
mark “.”. The hot keys are for speeding up inputs of IP addresses or etc.
Select <Ż> / <Ź> and press ENTER to move the cursor to left / right in the entry
field.
Select and press ENTER, or press DOME.
Select and press ENTER..
Select and press ENTER to save the settings and exit, otherwise press ESC
or select and press ENTER to exit without saving changes.