ARM Electronics DVRHD OSD - Manual (Page 13)

OSD Setup Manual
12
„ Time Zone
Press ENTER to set users’ local time zone. Please refer to the following figure or
visit www.greenwichmeantime.com to find out users’ local time zone.
NOTE: must be set to users’ local time zone or the
Time Protocol Setup> will not be accessible.
„ Date/Time Display
The date/time display can be set to be shown in 1 row, 2 rows, or not shown. Use
the UP / DOWN keys to change the setting.
„ Date Display Mode
This menu allows users to set the display type of the date. Three options are
provided: , or . “Y” represents “Year”, “M” represents
“Month” and “D” represents “Day”. Use UP / DOWN keys to change the setting.
„ Time Display Mode
Users can set the time format to <12 hour> or <24 hour>. Use the UP / DOWN
keys to change the format.