ARM Electronics DVRHD OSD - Manual (Page 44)

OSD Setup Manual
43
Event Setup ʳ ʳ ʳ
This menu allows users to determine Versatile H.264 DVR behavior in response to alarm
events. In the Main menu, move the cursor to and press ENTER. The
following menu is displayed. Items in the Event Setup menu are described in the following
subsections.
Event Setup
Internal Buzzer
Event Icon
Email Notice
Email Attachment
Event Full Screen
Event Duration
Per Channel Config ON
ON
OFF
OFF
None
20 Sec
< Internal Buzzer >
This item allows users to enable / disable internal buzzer of the Versatile H.264 DVR. If
is selected, the buzzer is activated in response to alarm events. If is selected,
the buzzer is not activated.
< Event Icon >
This item enables (ON) / disables (OFF) the display of event icons on the monitor when
alarm events occur. The event icons are represented by a character according to the event
types respectively. Refer to the following table for association of event icons and event
types.
Event Icon Event Type
A Alarm in event
M Motion detection event
L Video loss event
< Email Notice >
The item enables (ON) / disables (OFF) the Email notification of an event. When an alarm
event is triggered and is enabled, an e-mail concerning the alarm event will
be sent.
NOTE: In order to send an event notification e-mail successfully, ensure that the
DVR is connecting to the internet.