Step 4: install the camera – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 8
Installation Guide
Step 4: Install the Camera
1.
Insert the camera cables through the straight tube, extension tube (if any), and through one
the side of the pole mount kit.
2.
Align the slot on the camera to the tab inside the straight tube and insert the top of the
camera.
3.
Twist the camera to align the screw holes and attach the two (2) mounting screws (included
in the camera package).
4.
For I9x models, attach the safety wire strap for added protection; see
Safety Wire Strap (For I9x Models)
on page 33.
5.
Remove the plastic covering the dome cover.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305