How to use the power adapter (for i9x models) – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 32
Installation Guide
How to Use the Power Adapter (For I9x Models)
1.
Slide the voltage switch to set the adapter voltage according to the voltage standard in your
location.
2.
Connect the power cord to the power adapter.
3.
Connect the power connector of the camera to the cable connector of the adapter.
1
2
Camera Side
Power Adapter
Side
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305