Appendices, How to install extension tubes, How to – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 31: Install extension tubes
Installation Guide
Appendices
How to Install Extension Tubes
If the Straight Tube is not long enough, add one or more extension tubes (purchased separately).
1.
Remove the two (2) pre-installed screws on the extension tube.
2.
Insert the cable into the extension tube.
3.
Align the slot on the extension tube to the tab inside the Straight Tube and install the
extension tube.
4.
Twist the extension tube to align the screw holes and reattach the two (2) mounting screws
removed from step 1.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305