Step 4: prepare the pole mount kit – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 23
Installation Guide
Step 4: Prepare the Pole Mount Kit
NOTE:
Before installation, make sure that the ceiling can bear more than the total weight of the
camera and the mounting accessories.
1.
Align the screw holes of the pole mount and the junction box.
2.
Attach the four (4) screws, which were removed from the junction box bracket, to secure the
pole mount to the junction box.
3.
Insert enough length of the cables into the junction box and attach the clamping nut to the
conduit gland body.
CAUTION:
Make sure the clamping nut is securely attached to the conduit gland body
to avoid water leak, etc.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305