ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount - Manual (Page 10)

www.acti.com
Installation Guide
10
Step 5: Connect the Cables
The camera itself is waterproof, however take note that the cable connections are not.
If the camera is mounted directly on the wall where the cables pass through the wall, then your
installation is complete and you do not need to waterproof the cable connections.
However, if the camera is mounted where the cables may be exposed then it is recommended to
waterproof the cable connections or use a junction box.
The camera comes with a Cable Gland and Conduit Gland . It is recommended to use one of
these glands when a high PoE injector will be used with the camera. However, if the bundled
power adapter will be used or digital input/output devices will be connected, it is recommended to
house the cables inside the junction box (see Pole Mount with Pendant Mount and Junction
Box Installation Procedures on page 19).
Determine the type of waterproof solution applicable to your installation environment
requirements and prepare the necessary accessories or purchase extra materials.
Cable Gland Conduit Gland
For use with an exterior-grade Ethernet cable
(not included in the package).
See How to Waterproof the Cable Using
the Cable Gland on page 11.
For use with 1/2” flexible conduit (not included
in the package).
See How to Waterproof the Cable Using
the Conduit Gland on page 15.