ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 30
Installation Guide
5.
Close the junction box door using the four (4) screws supplied with the junction box.
6.
NOTE:
Make sure the side is door is tightly sealed to ensure water does not enter the
junction box.
7.
On the network side, connect the other end of the Ethernet cable to a network switch.
8.
On the power supply side, attach the male-type plug on the other end of the power cable, and
then connect it to a power outlet.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305