Step 2: attach the pole mount kit – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 6
Installation Guide
Step 2: Attach the Pole Mount Kit
NOTE:
Before installation, make sure the horizontal pole can bear more than the total weight of
the camera and the mounting accessories.
1.
Using a screwdriver, turn the screw head of the wire strap counter-clockwise continuously
until the two ends are detached.
2.
Insert the wire strap through the strap holes of the pole mount.
3.
Do steps 1 and 2 to the other wire strap.
4.
Encircle the pole with the wire straps.
NOTE:
The wire straps can hold between 134 ~ 228 mm (5.28 ~ 9 in.) pole diameter.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305