Installation guide – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 24
Installation Guide
DISCLAIMER:
The manufacturer will not be responsible for damage caused by water leak
from incorrect cabling methods.
4.
Using a screwdriver, turn the screw head of the pole mount wire strap counter-clockwise
continuously until the two ends are detached.
5.
Insert the wire strap through the strap holes of the pole mount.
6.
Do steps 4 and 5 to the other wire strap.
7.
Encircle the pole with the wire straps.
NOTE:
The wire straps can hold between 134 ~ 228 mm (5.28 ~ 9 in.) pole diameter.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305