Installation guide – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 12
Installation Guide
4.
Insert the Ethernet cable through the sealing rubber and claw.
5.
Attach one (1) supplied rubber ring on the gland body (smooth end).
NOTE:
Make sure the rubber ring is completely aligned on the gap on the gland body.
6.
Attach the gland body to the Ethernet port of the camera.
IMPORTANT!
Make sure the rubber ring is completely aligned and flat on the gland body
to avoid
possible water leakage.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305