ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount - Manual (Page 29)

www.acti.com
Installation Guide
29
Step 7: Connect the Cables
From the junction box, perform the following:
1. Connect the bundled power adapter and power cord and place them inside the junction box.
For I9x models, see How to Use the Power Adapter (For I9x Models) on page 32 for more
information on using the power adapter.
2. Connect the Ethernet cable from the network side to the Ethernet port of the camera.
3. If necessary, connect the colored wires to digital input or output (DI/DO) devices to trigger
events or notifications.
NOTE : Follow the wiring instructions described in the Camera Hardware Manual
downloadable from the website ( www.acti.com ).
4. Attach the female-type socket to the power cable in the junction box, and connect the power
cord to the socket.
NOTE:

Only a power cable fits through the conduit hole of the junction box; thus the
installation of a power outlet to the power line cable must be done inside the junction
box.

Use only the supplied power adapter and power cord that came with the camera or
the optional High PoE Injector (PPOE-0110). Using other accessories not approved
by the manufacturer may cause damage to the equipment.