ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount - Manual (Page 14)

www.acti.com
Installation Guide
14
10. If necessary, connect the colored wires to digital input or output (DI/DO) devices to trigger
events or notifications. Make sure to waterproof the cable connection (e.g. wrap with
waterproof tape).
NOTE : Follow the wiring instructions described in the Camera Hardware Manual
downloadable from the website ( www.acti.com ).
11. Arrange all unused cables and wrap them with the waterproof tape.
NOTE:

Different applications and installation environments require different types of
waterproofing methods which may not be covered in this manual. Check your
installation environment and adapt a suitable waterproofing method.

If the camera is installed outdoors and the bundled power adapter is used or
input/output devices are connected, be sure to protect them from different
environmental factors. It is recommended to place the cable connections indoors or
housed them inside a junction box (see Pole Mount with Pendant Mount and
Junction Box Installation Procedures on page 19).
DISCLAIMER: ACTi will not be responsible for camera damage caused by improper use
of the power adapter.