ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount - Manual (Page 3)

www.acti.com
Installation Guide
3
Mounting Solutions
If the camera will be installed on a horizontal pole using pendant mount, consider the following
options:
Mounting Solution Cabling Solution
Must Drill a Hole
on the Wall
Pole Mount with Pendant
Mount
(SMAX-0096)
The cables goes from the top of
the camera into the straight tube
and comes out behind the pole
mount kit.
When using this type of
installation outdoors, it is
recommended to use a high PoE
injector (purchased separately).
No
PMAX- 0503 PMAX-0102
Pole Mount with Pendant
Mount and Junction Box
The cables and the bundled
power adapter are housed inside
the junction box. The cables go
out the junction box enclosed in
a flexible conduit. The flexible
conduit comes out behind the
pole mount kit.
No
PMAX-0503 PMAX-0102 PMAX-0700