How to waterproof the cable using, The conduit gland, E 15 – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 15: Installation guide
Installation Guide
How to Waterproof the Cable Using the Conduit Gland
1.
Prepare the following items:
Cable Gland
Gland Rubber Ring
1/2” Flexible Conduit
Waterproof Tape
NOTE:
The washer
will not be used in this
installation, please set
it aside.
NOTE:
Not included
in the camera
package.
NOTE:
Not included in
the camera package.
2.
Detach the conduit gland as shown below.
3.
Insert the Ethernet cable through the flexible conduit. Then insert the clamping nut through
the flexible conduit.
Gland Body
Clamping Nut
Sealing Rubber
Washer
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305