Installation guide – ACTi Outdoor PTZ / Speed Dome (I9x) on Horizontal Pole with Pendant Mount User Manual
Page 5
Installation Guide
2.
Carefully lift the camera cover and place it aside.
NOTE:
The cover is attached to the camera by a
metallic wire; do not abruptly lift the cover.
3.
Remove the outer and inner Styrofoam.
Outer Styrofoam
Inner Styrofoam
4.
Attach the camera cover.
Align the cover screws to the screw holes on the
camera (as marked on the illustration) and secure the
screws using the bundled Allen wrench.
This manual is related to the following products:
- Outdoor PTZ / Speed Dome (I9x) on Hard Ceiling with Pendant Mount Outdoor PTZ / Speed Dome (I9x) on Straight Wall with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Vertical Pole with Accessory Sets of PMAX-0305 Outdoor PTZ / Speed Dome (I9x) on Corner Wall with Accessory Sets of PMAX-0305