Welltech WG5260 V.6.2 - Manual (Page 88)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0 - 88 -
8700
TRUNK ALARM: TrunkId=x,
Comment='', LOS=1, LOF=0, RAI=0,
AIS=0, RAI_CRC=0
Disconnect to PSTN
8702 BOARD x TRUNK(S) FOUND Board x Trunk(s) found
8703
[0]: evt: D CHANNEL STATUS:
runkId=3, Status=1, Comment='',
LOS=14, LOF=0, RAI=108,
AIS=145, RAI_CRC=-1
D Channel and Trunk ID (ID: 0)
not available
9500 Gateway application started VoIP Gateway program start
9500 AAA Mgr application started AAA Manager program start
9500 TelnSvr application started Telnet Server program start
9501 VoIP Board (0) started Interface (ID:0) start
9502 H323 (SIP) stack started H323 (SIP) stack start
H323 GK [xxx.xxx.xxx.xxx:xxxx]
found & registered
Registered to H323 Gatekeeper
9503
[SIP Register]: [xxx.xxx.xxx.xxxx]
Found & Registered. Registered to SIP Registrater
Server
9504 PSTN trunk (0) alarm clear Connect to PSTN
9505
[0]: evt: D CHANNEL STATUS:
TrunkId=3, Status=0, Comment='',
LOS=29, LOF=67, RAI=31, AIS=1,
RAI_CRC=-1
D Channel and Trunk ID (ID:0)
available
9600 SNTP client application started
Failed / Success to connect
SNTP server
Debug Info
Start Path: Click “Monitor>Debug Info”
Figure 9.5-1
Filed Description:
• Get Log: Get debug log (-1~999)
• Search: Search debug logs
• Clear: Clear log
Ping
You can use the “Ping” to check an IP is active or not.
Start Path: Configuration>Ping