Welltech WG5260 V.6.2 - Manual (Page 13)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0 - 13 -
Chapter 2 Logon WellGate 5260
After connected E1/T1 & Ethernet cables into the WellGate 5260, turned
on the power. The first step is to logon the system and set up the IP address.
Before you can use the Browser to configure WellGate 5260, you need to
have Java Standard Runtime (1_4_1_02) to make it work. Please refer to
Appendix 2 Java plug-in Install for detail.
Logon WellGate 5260
Setp1: Start IE6.0 (or later version) to navigate WellGate 5260 Management
System by typing the default IP addresses (the default URL is
http://192.168.111.111:10087). The screen will display User ID and
Password as figure 2.1-1.
Figure 2.1-1
☻Note: The default network IP address is 192.168.111.111 and subnet
mask is 255.255.255.0
Step 2: Enter log user name and password (the default user id is root and user
password is root). You can manage your user account via web (refer to
Section “
Account Manager ”) later.
Figure 2.1-2
Step 3: The screen shows the Home Page of WellGate 5260 as figure 2.1-3.
Figure 2.1-3