Welltech WG5260 V.6.2 - Manual (Page 73)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0 - 73 -
• Matched ANI Prefix: Calling party number used to filter
• Allow Use Others: To select other T1/E1 trunk when all trunk are busy at
your desired Hunting Group.
- Allowed: The call will use other T1/E1 trunks which is not belong to the
selected hunting group
- Forbad: The call will be disconnected immediately
AAA
When you have an external RADIUS server to do the AAA (Authorization,
Authentication and Accounting), enter the correct parameter to the Radius
setting. It must be used in call flow to take effect.
Start Path: Configuration>Radius Setting
Figure 7.9-1
Parameters Description:
• Authorization IP: Radius Authentication/Authorization Server IP address
(default)
• Authorization Port: Radius Authentication/Authorization Server Port
• Accounting IP: Radius Account Server IP address
• Accounting Port: Radius Account Server Port
• Backup Authorization IP: Backup Radius Authentication/Authorization
Server IP address
• Backup Authorization Port: Backup Radius Authentication/Authorization
Server Port
• Backup Accounting IP: Backup Radius Account Server IP address
• Backup Accounting Port: Backup Radius Account Server Port
• Max Retry: The maximum retry times
• Response Timer (msec): The maximum wait for response time from
RADIUS Server
• Switch Threshold: Switch to alternate RADIUS Server when failures are
occurred more than switch threshold.
• Local Port: The local RADIUS client port is used.
• Secret Key: The shared secret key with RADIUS Server
• CISCO Mode: Send redundant RADIUS attribute as CISCO mode or not.
• CDR Mode: Enable write the CDR or not
• CDR Keepdays: CDR system keeping days
• Vendor ID: RADIUS Vendor ID