Welltech WG5260 V.6.2 - Manual (Page 68)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0 - 68 -
Figure 7.5-3
Parameter Description:
• IP Network: IP Address or prefix used to be filtered
• Access Mode:
- Allow: the inputs IP Network are allowed for calls.
• Disallow: The inputs IP Network are disallowed for calls.
• Account Code: The account code used for this IP address. It can be
used for billing purpose. When you setup an account code, the DNIS
prefix must match the account code (e.g. account code +…).
• Customer Name: Display the customer name
- Default: If a call is coming from the defined IP but not start with the
correct account code, this default account code will be used.
- Remove Account Code: Remove the account code or not
- ANI ACL: Whether to support the ANI ACL or not in this IP
• Add Prefix: Whether to add the entered prefix to the number dialed to
this IP
- Max concurrent call: The max concurrent calls allowed to this IP
☻Note: If in the system has both allowance and disallowance setup, the
system will check allowance first and disallowance later. If only
disallowance inputted, all IP will allow to work except disallowed
network. If only allowance inputted, only those IP from allowance
list will work.
ANI ACL
The calling number access control list
Start Path: Configuration>Access Control>ANI ACL
Figure 7.5-3