Chapter 8 system control, System, System time – Welltech WG5260 V.6.2 User Manual
Page 75: Ystem
Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0
- 75 -
Chapter 8 System Control
System
Start path: Click Control>System
Figure 8.1-1
Parameter Description:
• Soft Reset: Soft Reset at WellGate 5260
• Restart: Restart the WellGate 5260
• Shutdown: Shutdown the WellGate 5260
System Time
Time zone Setting
Step 1: If you would like to use time zone, click Time zone button to setup the
system time zone as figure 8.2-1.
Figure 8.2-1
Standard:
Step 2: Select the Standard option to setup the system predefined time zone
as figure 8.2-2.
Figure 8.2-2
Parameter Description:
• Time
Zone:
- Standard: Use a predefined standard time zone (Refer
)
- Customize: Use a user defined time zone
• Auto Daylight Saving: Auto adjust daylight saving time or not
User defined time zone:
Step 3: Select the Customized option and enter the time zone bias to set a
user defined time zone as figure 8.2-3.