H.323 configuration, H.323, Onfiguration – Welltech WG5260 V.6.2 User Manual

Page 21

Welltech Computer Co., Ltd.

WellGate 5260 User Guide – V6.2.0

- 21 -

Frequency Changed Parameters:

• Trunk Type: E1 or T1

• Termin Side: User Side or Network Side

• Protocol Tag: ISDN protocol used

• Line Code: T1 or E1 line code used
Step 4: After succeeded to change the Trunk Configuration, the screen comes

back the page of Trunk Configuration as figure 3.2-4.

Figure 3.2-4

H.323 Configuration

This section is going to setup the H.323 parameter. If you only need SIP

calls, you can skip it.
Step 1: Click Configuration > H.323 to setup the H.323 parameters for

Gatekeeper related information as figure 3.3-1.

Figure 3.3-1