Welltech WG5260 V.6.2 - Manual (Page 52)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0 - 52 -
Overlap Configuration
The administrator can configure ISDN overlapping sending dialing plan
here to speed up the user dialing. The longest prefix will be matched. Display
as figure 7.2-4.
Figure 7.2-4
Parameter Description:
• Prefix: The prefix that the dial plan matched
• Max Length: The max length of the prefix
• Apply To: The trunk number that the prefix will apply to
T1/E1 Trunk Configuration
For each E1/T1 configuration can be set as the following:
Start Path: Configuration>Interface>Detail
Figure 7.2-5
Basic Parameter Description:
• Interface ID: System parameter
• Trunk ID: System parameter
• Trunk Type: T1or E1 selection
• Description: Description for this trunk ID
• Termin Side: Network site or User Site (normally, you set to “user site”
when connect to switch)