beautypg.com

Welltech WG5260 V.6.2 User Manual

Page 54

background image

Welltech Computer Co., Ltd.

WellGate 5260 User Guide – V6.2.0

- 54 -

- 72-Frame Multi-Frame

o

For E1:

- Automatic CRC4 or Double Frame selection
- Double Frame Format
- CRC4 multi-frame
- CRC4 extend multi-frame

• Line Code: T1: you can choose AMI, B8ZS; E1: you can choose AMI, HDB3

• PSTN Trace: PSTN layer debug trace. It will generate a debug trace file for

tracing purpose. Only enables it under Welltech technical supports
instruction and disable it when complete the debug

• Inbound DM Group: Digit Manipulation group used for incoming calls

associated to this trunk

• Outbound DM Group: Digit Manipulation group used for outgoing calls

• Local Ring Back: Provide ring back tone for PSTN or not. It only works when

VoIP outgoing Fast Start is disabled.

• Channel Mask: Channel mask for incoming or outgoing calls (default:

0xffffffff)
Start from MSB each bit, indicate a time slot for a trunk (e.g. 0x0000ffff: 0~
15 B channels are disabled, 17~31 B channel free)

• Clock Master: PSTN trunk clock source

• Trunk Group Name: The trunk group name. This is the trunk group used for

least cost routing according to draft-ietf-iptel-trunk-group-10.txt.

Advance Trunk Configuration:
Start Path: Configuration>Interface>Trunk>Advance

Figure 7.2-6

Advance Parameter Description:

• Interface ID: System parameter

• Trunk ID: System parameter

• Src Num Plan: ISDN source number plan

• Dest Num Plan: ISDN destination number plan