Welltech WG5260 V.6.2 - Manual (Page 71)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0 - 71 -
Step 2: Click the New created NR and Detail button to add digits setting as
figure 7.6-2.
Figure 7.6-2
Field Description:
• Original Number: Original number filter
• Target Type: ANI or DNIS
• Target Number: The ANI or DNIS are change to target number
Data Base Number
The purpose of Data Base Number is to change called number for
PSTN or IP (just like a Random number). It must be used in call flow to take
effect.
Start Path: Configuration>Data Base Number
Figure 7.7-1
Routing Plan
The purpose of Routing Plan is to select T1/E1 trunk and channels by
your preference when there is a call from IP side to PSTN side. The PSTN
must be used in call flow edit or line hunting component to take effect.
Hunting Group
Start Path: Configuration>Routing Plan>Hunting Group
Figure 7.8-1
Parameters Description:
• Group ID: Hunting Group ID