Welltech WG5260 V.6.2 - Manual (Page 70)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.2.0 - 70 -
Click the Detail button:
Figure 7.5-6
Parameters Description:
• DNIS: Called party number used for filter
• Access Mode:
- Allow:
The called numbers are allowed for calls
- Disallow: The called numbers are disallowed for calls
☻Note: If in the system has both allowance and disallowance setup, the
system will check allowance first and disallowance later. If only
disallowance inputted all DNIS will allow to work except disallowed
DNIS. If only allowance inputted, only those DNIS from allowance
list will work.
Number Replace
The purpose of “Number Replace” is to replace called number or calling
number for PSTN or IP. It must be used in call flow to take effect.
Step 1: It is useful for real PSTN number to virtual VoIP number replacement.
Click Number Replace to add a new Number Replace Group, add as
figure 7.6-1.
Figure 7.6-1
Field Description:
• Group ID: 1 (Number Replace Group identify)
• Description: Description