Wavetronix Command Collector (CMD-DCx) - User Guide - Manual (Page 50)

In this chapter
˽ Sensor Info Bar
˽ Sensor Config Tab
˽ Lanes/Approaches Tab
˽ Sensor Commands Tab
˽ Data Query Tab
5
The Sensor Config page contains detailed information about the sensor’s configuration and
lane assignments (see Figure 5.1). Here, you can view and change the configuration of a
sensor, get a clearer picture of the sensor’s communication condition and perform a wider
variety of driver commands and data queries than are available through the main Sensors
page.
Note
The fields displayed in the Sensor Config page can vary based on the sensor type.
To open the Sensor Config page for a particular sensor, click on that sensor’s link in the
Sensor column of the sensor list.
Sensor Configuration Page
5